An LED strip under kitchen cabinets, behind the TV, or in a ceiling recess instantly makes a space feel calmer and look more beautiful. But only if everything is right: the type of strip, the voltage, the light colour, and especially the power supply. The most common mistake? A power supply that is too weak, causing the strip to flicker or the power supply to become far too hot. In this guide, you’ll learn how to choose the right strip in a few simple steps and how to calculate which power supply you need in just one minute.
In short
- COB or SMD: COB provides a single, even line of light without dots, while SMD shows individual light dots if used without a cover.
- 24V or 12V: choose 24V for new projects. This reduces current flow and keeps the light more even over the entire length.
- Power supply: watts per metre × number of metres, plus at least 20% extra. A 5 m roll at 8 W/m (40 W) therefore requires a power supply of at least 48 W.
- Please note: my strips do not include a power supply. You choose one yourself, matching the power and location.
Jump straight to:
COB or SMD: even line of light or individual dots?
SMD LED strip
An SMD strip has individual LEDs in a row. If you look at it directly, or see the reflection in a glossy worktop, you’ll see a row of light dots. In an aluminium profile with a milky-white cover, this is largely eliminated.
COB LED strip
With COB (chip on board), the LEDs are so close together and under a phosphor layer that you see a single, even line of light, even without a profile. Ideal under kitchen cabinets, in open recesses, and anywhere you can see the strip or where it reflects.
My own strips are COB: 24V, 800 or 1000 lumens per metre, and a colour rendering index (CRI) of over 90. The latter means that colours look natural under the light, which you’ll notice especially with wood, food, and skin tones. Read more atmosphere ideas in Indirect lighting with LED strips.
COB LED strip warm white, 5 × 5 m24V, 8W/m, 3000K, 800 lm/m, CRI>90View ›
COB LED strip cool white, 5 × 5 m24V, 8W/m, 4000K, 800 lm/m, CRI>90View ›
COB LED strip extra bright, 5 × 5 m24V, 10W/m, 3000K, 1000 lm/mView ›
12V or 24V: why 24V is usually the better choice
At the same power, a 24V strip draws half as much current as a 12V strip. Less current means less voltage drop over the length. The result: the light remains just as bright at the end of the strip as at the beginning, and the copper tracks and connections become less warm.
Which light colour and how many lumens?
| Application | Light colour | Brightness |
|---|---|---|
| Atmosphere behind TV, sofa, or in a ceiling recess | warm white 3000K | 800 lm/m, optionally dimmed |
| Work light under kitchen cabinets | warm white 3000K or cool white 4000K | 1000 lm/m |
| Workbench, cabinet, garage, or shop window | cool white 4000K or daylight white 6000K | 800 to 1000 lm/m |
Unsure about the light colour? See the difference with the Light colour in your space tool.
How to calculate which power supply you need
The calculation is simple:
That extra 20% is there for a reason. A power supply running at 100% becomes warm and will not last as long. With some headroom, it stays cool and has reserve capacity if you later make the strip slightly longer.
| Strip | Consumption | Minimum | Suitable power supply |
|---|---|---|---|
| 3 m of 8 W/m | 24 W | 29 W | 36 W plug-in power supply |
| 1 roll of 5 m, 8 W/m | 40 W | 48 W | 48 W plug-in power supply or 60 W driver |
| 1 roll of 5 m, 10 W/m | 50 W | 60 W | 60 W driver or 72 W adapter |
| 2 rolls of 5 m, 8 W/m | 80 W | 96 W | 100 W driver |
| 3 rolls of 5 m, 8 W/m | 120 W | 144 W | 145 W or 200 W driver |
24V 48W plug-in power supply2A, EU plug, for 1 roll of 8 W/mView ›
24V 60W LED driver2.5A, metal casing, IP20View ›
24V 100W LED driver4.17A, for 2 rolls of 8 W/mView ›
Adapter 24V 72W3A, with EU plug, IP41View ›
LED driver 24V 145W6.04A, metal housing, IP20View ›
LED driver 24V 150W, 3 pieces6.25A, waterproof IP67View ›
Plug-in power supply or driver: what suits your space?
Plug-in power supply or adapter
Plug it into the wall socket, ready to go. Convenient behind the TV or in a cabinet, without having to do anything to the fixed installation. Suitable for approximately one roll.
Driver in metal housing (IP20)
For multiple rolls and fixed installation, for example in a ceiling or kitchen cabinet. IP20 means: indoors and dry only, with space around it so it can dissipate heat.
Waterproof driver (IP67)
For outdoors, under a canopy, in the bathroom or in a damp shed. Note: the strip itself must also be suitable for that location. You can read what the IP ratings mean in IP rating explained.
Tips for a neat result
- Cut only at the cut mark. The piece between the marks will no longer work.
- Do not power long sections from one end. It is better not to connect multiple rolls together, but give each roll its own power wire from the power supply.
- Clean and degrease the surface before sticking the strip, so it stays in place.
- Dimming? Place an LED dimmer between the power supply and the strip. You can read how to choose one in Dimmable LED lights and LED dimmers.
📩 More LED tips in your inbox?
Sign up and you will immediately receive a 5% welcome discount in your inbox. After that, I will occasionally send you a new LED tip. You can unsubscribe at any time.
Frequently asked questions
Does the LED strip come with a power supply?
Can I use a larger power supply than needed?
Why is my LED strip flickering?
Is COB better than SMD?
Regards,
Bas / LEDPLANET.NL
The tips in this article are intended as general advice. If you are working on the fixed electrical installation or on 230V connections, have this done by a certified electrician. Always follow the manual of your strip and power supply.









