LED recessed spot tiltable 10W - 4 pieces - Cool white 4000K - 1,000 lm - 23° - Ø140mm - cut-out Ø130mm - IP20 - CRI80 - 230V

Set of 4 tiltable LED recessed spots of 10W, each giving 1,000 lumens of cool white light at 4000K in a narrow 23° beam. You tilt the spot 0 to 75° and rotate it 360°, so you aim the light exactly at a shelf, product, painting or counter. The spot fits a ceiling cut-out of Ø130 mm; the white Ø140 mm rim neatly covers the hole.

What's in the box, and what isn't?

• ✔ 4 × LED recessed spot 10W, each with a separate flicker-free LED driver (with plug connection) and spring clips
• ✘ No wire connectors (for example lever connectors or a terminal block)
• ✘ No tools: for the ceiling cut-out you need a Ø130 mm hole saw

How the light looks and feels

Cool white 4000K is bright, neutral white light: fresh without feeling cold. Products, fabrics and colours look true to life, with a CRI^ⓘ of 80 or higher. The reflector and COB LED create a powerful, well-defined beam.

Picture a shelf where your products really stand out, or a painting that seems to step out of the wall in the evening. That is what these spots are for: instead of lighting the whole room evenly, they place a bright pool of light exactly where you want it. The flicker-free driver^ⓘ gives calm light without flickering.

How big is the pool of light?

With the 23° beam, the pool of light is about Ø0.41 m at 1 metre, about Ø0.81 m at 2 metres and about Ø1.22 m at 3 metres. A few examples of what you can do with 4 spots:

• A shop window or a wall with shelves
• A kitchen island or long dining table
• Two walls in a showroom or gallery

Looking for even base lighting for a whole room? Then choose a downlight with a wide 120° beam, and use these spots for the accents.

Installation in 5 steps

1. Switch off the power at the right circuit in the fuse box and check that the wires are dead.
2. Cut a Ø130 mm hole for each spot. First check that there is at least 120 mm of free space above the ceiling, plus room for the driver, and no joists, pipes or cables in the way.
3. Connect the driver to live (L) and neutral (N) with suitable connectors, and click the spot's plug into the driver.
4. Place the driver next to the hole above the ceiling, fold the springs up and push the spot into the hole. The springs clamp it in place.
5. Switch on the power and aim the spot by tilting (0-75°) and rotating it (360°).

Not sure about the wiring? Have it done by an electrician. The tips above are meant as advice; connection and installation remain your own responsibility.

Where can you use this spot?

With IP20^ⓘ this spot is meant for dry indoor rooms: shops, showrooms, hospitality, galleries, offices and the living room. It is not suitable for the shower or bath zone, outdoors or other damp places.

Specifications per spot

• Power: 10W · Luminous flux: 1,000 lumens · Energy label: F
• Light colour: cool white 4000K, CRI ≥80 · Beam angle: 23°
• Voltage: 220-240V, separate flicker-free driver · Dimmable: no
• Dimensions: Ø140 × 120 mm · Cut-out: Ø130 mm · Protection rating: IP20
• Adjustable: 0-75° tilt, 360° rotation · Certifications: CE, RoHS · Warranty: 3 years

Better value per set

The bigger the set, the lower the price per spot. You get 4 identical spots in exactly the same light colour, so all accents look the same. Also available as a set of 2, 6 or 10 pieces.