LED tube 150 cm T8 with motion sensor (30 sec) - 2 pieces - 25W - 3,500 lm - Cool white 4000K - G13 - flicker-free

A set of 2 T8 LED tubes measuring 150 cm with a built-in motion sensor. The tube turns on automatically as soon as someone approaches and turns off 30 seconds after the last movement. Ideal for spaces where people come and go, such as stairwells, hallways, storage rooms, parking garages, warehouses, halls, and production areas. Each tube produces 3500 lumens at 25 watts (140 lm/W^ⓘ); the set of 2 produces 7,000 lumens together.

Bright 4000K cool white light

With 4000K cool white, you get neutral, bright light without a yellow or blue tint: pleasant for working and good for seeing details. The color rendering is CRI^ⓘ >80 and the driver is flicker-free, so no unstable light when working with screens or on camera.

How the sensor works

The end cap contains a microwave sensor^ⓘ that detects movement at a distance of 4 to 6 meters (measured at a mounting height of 3 meters). The sensor looks through plastic, glass, and thin non-metallic materials, but not through metal. It does not have a daylight sensor, so the tube also switches on during the day. If you hang multiple sensor tubes close together, keep at least 1.5 meters between the sensors, otherwise they may keep activating each other.

Fits the standard T8 fitting

The tube is 1500 mm long (1514 mm including pins) and has a G13^ⓘ connection, the same size as the classic 58-watt fluorescent tube. The power supply enters from one side (single-ended connection). If your fixture has a conventional ballast, replace the starter with an LED starter. If your fixture has an electronic ballast, remove it and connect the tube directly to 230V~. If in doubt, have an installer perform the conversion. The tube operates with a PF^ⓘ ≥0.9.

Sturdy: aluminum with a polycarbonate cover

The housing is made of aluminum, which dissipates the heat from the LEDs well, with a cover made of PC^ⓘ instead of glass. So nothing can splinter during installation or transport. Each tube contains 215 LEDs of the SMD2835^ⓘ type, distributed over the entire length for an even line of light. The tubes are IP20^ⓘ, intended for dry indoor spaces, and last about 50,000 hours. They operate at temperatures from -20 to +50 °C, so also in a cold garage or warehouse.

Why a set of 2?

With 2 tubes you can convert exactly one double fixture, or replace a broken tube and immediately have a spare. Both tubes have the same light color, so you will see no difference next to each other. You get 5 years warranty.

• 25W — 3500 lm — 140 lm/W per tube
• Cool white 4000K — CRI >80 — 120° beam angle
• T8 / G13 — 1500 mm — 230V~
• Motion sensor 4–6 m — 30 sec afterglow time — IP20
• Set of 2 pieces — 5 years warranty