LED high bay UFO 200W - 2 pieces - Cool white 4000K - 30,000 lm - IP65 - 230V

A shed or barn on a farm doesn't need a complicated lighting system: on when you're there, off when you leave. This set of two 200W UFO LED high bays in cool white 4000K, non-dimmable, does exactly that, with plenty of light.

Why switch to LED?

Old metal halide lamps (HPI/HQI) take minutes to warm up and lose a lot of light over time. This LED high bay is at full power immediately, lasts 50,000 hours according to the manufacturer's specifications, and requires no replacement of lamps or ballasts. That saves cherry picker hours at a height of 5 to 12 metres.

Compact and robust

With Ø340 × 110 mm, the lamp is compact for its light output. It weighs approximately 2.25 kg and hangs from a single suspension point. The cooling fins around it give the lamp its characteristic UFO shape.

How the light looks

Cool white 4000K is bright and neutral, so you have good visibility when feeding, moving straw, or working on the tractor. Each lamp provides 30,000 lumens in a 120° beam. With this set of 2, you have a total of 60,000 lumens.

Non-dimmable, but simple

This version is non-dimmable: you switch it on and off with a regular switch. This makes the installation simple and inexpensive, without control wires or controls.

Height and light level

The lamp is intended for a mounting height of approximately 5 to 12 metres. If you hang it lower, the light becomes brighter and the light spot smaller; if you hang it higher, you spread the light over a larger area.

Layout with 2 high bays

Hang the lamps above the feed path or workplace, at a height of 5 to 12 metres, with 6 to 10 metres between them. This is a rule of thumb; if in doubt, a light calculation for your space will help.

Practical example

On a farm, you want lighting that can withstand dust from straw and feed, and that simply works. These lamps are IP65 and without dimming electronics: one switch at the door is enough. Less technology also means less that can malfunction.

Hanging and connecting

1. Attach a hook or chain to the roof structure (not included).
2. Hang the lamp from the suspension eye.
3. Connect the approximately 30 cm power cord to a junction box at 230V. The lamp is class I: always connect the earth.

Advice: have the installation carried out by a certified installer.

Actual consumption

Together, the 2 lamps draw 400W. If they burn for 10 hours a day on 250 working days, you end up with around 1,000 kWh per year, approximately 300 euros at 0.30 euros per kWh. This is a calculation example; your hours and tariff determine the actual amount.

If you replace your old 400W metal halide lamps (with ballast around 440W), you save approximately 1,200 kWh per year with this set at the same usage.

Specifications

• 30,000 lumens, 200W, 120°
• Cool white 4000K, CRI ≥80
• Ø340 × 110 mm, approximately 2.25 kg
• IP65, class I
• 230V, cord approximately 30 cm, non-dimmable
• 50,000 hours, 5-year warranty, energy class D

Contents of the set

2 complete 200W high bays in cool white 4000K. Chains, hooks, and junction boxes are your own responsibility.

Need more or less? Choose per piece; the more the set contains, the less you pay per piece.