LED tube 150 cm T8 with motion sensor (60 sec) - 4 pieces - 25W - 3,500 lm - Daylight white 6000K - G13 - flicker-free

A set of 4 T8 LED tubes measuring 150 cm with a built-in motion sensor. The tube turns on automatically when someone approaches and turns off 60 seconds after the last detected movement. Ideal for spaces where people come and go, such as stairwells, hallways, storage rooms, parking garages, warehouses, halls, and production areas. Each tube produces 3500 lumens at 25 watts (140 lm/W^ⓘ); the set of 4 produces 14,000 lumens in total.

Fresh 6000K daylight-white light

With 6000K daylight-white, you get bright, slightly bluish-white light with high contrast. Ideal for warehouses, garages, parking garages, and workshops where you want to stay alert and see everything clearly. The color rendering is CRI^ⓘ >80 and the driver is flicker-free.

How the sensor works

The end cap contains a microwave sensor^ⓘ that detects movement at a distance of 4 to 6 meters (measured at a mounting height of 3 meters). The sensor can see through plastic, glass, and thin non-metallic materials, but not through metal. It does not have a daylight sensor, so the tube also switches on during the day. If you hang multiple sensor tubes close together, keep at least 1.5 meters between the sensors, otherwise they may continuously activate each other.

Fits standard T8 fittings

The tube is 1500 mm long (1514 mm including pins) and has a G13^ⓘ connection, the same size as the classic 58-watt fluorescent tube. The power supply is on one side (single-ended connection). If your fixture has a conventional ballast, replace the starter with an LED starter. If your fixture has an electronic ballast, remove it and connect the tube directly to 230V~. If in doubt, have an installer perform the conversion. The tube operates with a PF^ⓘ ≥0.9.

Robust: aluminum with a polycarbonate cover

The housing is made of aluminum, which effectively dissipates heat from the LEDs, with a cover made of PC^ⓘ instead of glass. Therefore, nothing can shatter during installation or transport. Each tube contains 215 LEDs of the SMD2835^ⓘ type, distributed along the entire length for an even line of light. The tubes are IP20^ⓘ, intended for dry indoor spaces, and last for around 50,000 hours. They operate at temperatures from -20 to +50 °C, so they are also suitable for cold garages or warehouses.

Why a set of 4?

With 4 tubes, you can create two double or four single fixtures, for example in a storage room, stairwell, or small garage. You pay less per tube than when bought individually, and all tubes have the same light color. You get a 5-year warranty.

• 25W — 3500 lm — 140 lm/W per tube
• Daylight-white 6000K — CRI >80 — 120° beam angle
• T8 / G13 — 1500 mm — 230V~
• Motion sensor 4–6 m — 60 sec afterglow time — IP20
• Set of 4 pieces — 5-year warranty