GU10 recessed spotlights complete set - 20 pieces - square white - LED 5W 440lm warm white 2700K - incl. lamp holders - 230V

Square white recessed spotlights combine a sleek, architectural shape with a calm appearance: modern, but without demanding attention. This set consists of 20 complete square recessed spotlights in white, each with a tiltable recessed fitting, a 5W GU10 LED spot in warm white (2700K) and a GU10 lamp holder with connecting wire.

20 spots: how much space do you light?

Twenty spots give you enough to light a large space in one go, such as a living room with an open kitchen, or to fit two rooms with the same spots. As a rule of thumb, keep 1 to 1.2 metres between the spots and about 50 to 60 cm from the wall; with twenty spots that gets you roughly to 20 to 30 m². Together the 20 spots deliver 8,800 lumens at a total consumption of just 100W. With 35W halogen spots that would be 700W.

Light colour: warm white 2700K

The 2700K light is warm white, comparable to a classic incandescent bulb. It makes a room feel soft and inviting, which is why it is the most popular light colour for the living room, bedroom, dining area and hallway. In a bathroom, too, warm white creates a relaxed atmosphere in the evening. Each spot gives you 440 lumens with a beam angle of 38° and a colour rendering (CRI) of more than 80.

Look and finish

The square shape matches the straight lines in your interior, such as tiles, cabinet fronts and ceiling seams. The white finish lets the spot disappear into a white ceiling, which gives a calm and spacious effect. The recessed fitting measures 86 × 86 × 25 mm, is made of coated steel and is tiltable, so you can aim the light at, for example, a painting, a wall or a worktop.

Not dimmable

The spots in this set have a white plastic housing and are not dimmable: you connect them to an ordinary switch. If you have a dimmer or want to be able to control the light, choose the dimmable version of this set.

Installation

Saw or drill a hole of 70 to 75 mm for each spot. Switch off the power, connect the lamp holder to the 230V wiring, fit the lamp holder onto the GU10 spot and slide the spot into the recessed fitting. The spring clips then hold the fitting firmly in the ceiling. Suitable for plasterboard and suspended ceilings, among others; make sure there is enough room above the ceiling for the spot and the lamp holder. If you are unsure about the wiring, have it done by an electrician.

Specifications

• Quantity: 20 complete recessed spotlights
• Fitting: square, white, 86 × 86 × 25 mm, coated steel, tiltable
• Cut-out: 70–75 mm
• Lamp: GU10 LED, 5W, 440 lm, 2700K (warm white), 38°, CRI>80
• Lamp housing: white plastic
• Dimmable: no
• Lamp holder: GU10, with 15 cm connecting wire, 2A / 250V
• Voltage: 230V~
• IP20, for dry indoor spaces
• Total: 8,800 lm at 100W
• Warranty: 3 years
• Energy label F (EPREL 2385863)