H1 LED headlight bulb set 2 pieces - CSP LED fanless - 6500K - 5200 lm - 12V/24V
Light colour
6500K Daylight white
What does this mean?
Light colour is expressed in Kelvin (K). The lower the value, the warmer and more yellow the light; the higher, the fresher and whiter.
The light: very bright, like daylight
H1 LED headlight bulb set 2 pieces - CSP LED fanless - 6500K - 5200 lm - 12V/24V is backordered and will ship as soon as it is back in stock.
OVN regulation
OVN regulation
When purchasing a similar item, you can return your old product free of charge. Please indicate this in the comments field of the shopping cart, including the details of the old item.
H1 LED headlight bulb set 2 pieces - CSP LED fanless - 6500K - 5200 lm - 12V/24V is backordered and will ship as soon as it is back in stock.
Description
Description
H1 LED bulb set with CSP LEDs – wide, bright beam in 6500K
This H1 LED headlight bulb set delivers bright daylight-white light of 6500K with a luminous flux of up to 5200 lumens. The bulbs use multi-chip CSP LEDs, which provide a wide light beam. The metal housing dissipates the heat passively, without a fan, so the bulbs run silently and maintenance-free. H1 bulbs are often used for high beam, in fog lights and in auxiliary spotlights, and in some cars for low beam. The set works on 12V and 24V and consists of two bulbs.
Why choose these H1 LED headlight bulbs
- Up to 5200 lumens in 6500K – bright, cool daylight-white light with a wide beam thanks to CSP LEDs.
- Passive cooling – metal housing without a fan that can wear out or make noise.
- Plug-and-play – designed to work without interfering with your car's electrical system.
- Compact with detachable collar – handy when space behind the headlight is tight.
- 12V and 24V, 2-year warranty – for cars, buses and trucks; CE and RoHS marked.
Easy to install
The bulbs fit the standard H1 base (P14.5s). Thanks to the detachable collar, you can fix the collar in the headlight first and then insert the bulb. Our advice: position the bulb so that the LEDs point left and right, where the filament of a halogen bulb would be, so the beam has a clean cut-off.
Check beforehand: base and space behind the headlight
Check your car's owner's manual or the old bulb to see which base you need. An H1 bulb has one connection pin and a separate wire or connector. LED bulbs are often longer at the back than halogen bulbs, so check whether the dust cover behind the headlight still closes properly.
Laws and regulations
In the Netherlands, only LED retrofit bulbs that are EU-approved for your vehicle are permitted in a halogen headlight. This set is CE and RoHS marked. So check in advance whether use in the headlight or fog light of your vehicle is permitted in the country where you drive.
Specifications
| Base | H1 (P14.5s) |
| Colour temperature | 6500K daylight white |
| Power | 38W |
| Luminous flux | up to 5200 lm |
| LED type | CSP, multi-chip |
| Voltage | 12V and 24V |
| Cooling | passive |
| Quantity | 2 pieces |
| Warranty | 2 years |
Looking for a different base? Also check out our LED headlight bulb sets for H4, H7, H11, HB3 and HB4.
Disclaimer: the installation and usage tips on this page are non-binding advice. Installation and use are at your own expense and responsibility; if in doubt, consult your vehicle's owner's manual or a specialist garage. LEDPLANET.NL is not liable for damage caused by incorrect installation or use.
Specifications
Specifications
-
RoHs quality mark✔
-
Lamp base/fitting














