LED downlight 18W - 20 pieces - Daylight white 6000K - 1,700 lm - Ø190mm - cut-out Ø160mm - 120° - IP20 - CRI80 - 230V

Set of 20 LED downlights of 18W, each giving 1,700 lumens of daylight white light at 6000K over a wide 120° beam. You fit them into a ceiling cut-out of Ø160 mm, and the white Ø190 mm rim neatly covers the hole. The downlights run directly on 230V: the LED driver is built in, so you don't need a separate transformer or bulb.

What's in the box, and what isn't?

• ✔ 20 × LED downlight 18W with integrated LED and driver, connection wire and spring clips
• ✘ No wire connectors (for example lever connectors or a terminal block)
• ✘ No tools: for the ceiling cut-out you need a Ø160 mm hole saw

How the light looks and feels

Daylight white 6000K is fresh, very bright light with a slightly bluish tint, similar to daylight on a clear day. You see details and contrast sharply: ideal for workshops, garages, warehouses, practice rooms and other places where you need to see well. With a CRI^ⓘ of 80 or higher, skin, wood and food look natural.

Picture it: you flip the switch and the whole ceiling lights up evenly at once. Thanks to the matt cover and the 120° beam angle you don't see harsh dots of light, but a calm, wide field of light without hard shadows. During the day you only see a clean white Ø190 mm ring in the ceiling.

How many downlights do you need?

As a guideline, allow about 100 to 150 lumens per m² in living areas, and 250 to 300 lumens per m² or more in a kitchen, office or workspace. Together this set gives 34,000 lumens. That lights roughly 225 m² of living space or about 115 m² of workspace. A few examples of what you can do with 20 downlights:

• The entire ground floor of a home
• An office with several workstations and a corridor
• A shop or showroom with even base lighting
• A renovation project covering several rooms at once

For an even light pattern at a standard ceiling height (about 2.6 m), keep roughly 1 to 1.5 metres between the downlights and about 50 cm from the wall.

Installation in 4 steps

1. Switch off the power at the right circuit in the fuse box and check that the wires are dead.
2. Cut a Ø160 mm hole for each downlight. First check that there is at least 67 mm of free space above the ceiling and no joists, pipes or cables in the way.
3. Connect the downlight to live (L) and neutral (N) with suitable connectors. This downlight is not dimmable, so do not connect it to a dimmer.
4. Fold the springs up and push the downlight into the hole. The springs clamp it against the ceiling. Switch the power back on and test.

Not sure about the wiring? Have it done by an electrician. The tips above are meant as advice; connection and installation remain your own responsibility.

Where can you use this downlight?

With IP20^ⓘ this downlight is meant for dry indoor rooms: living room, bedroom, hallway, landing, kitchen, office, shop and practice. It is not suitable for the shower or bath zone, outdoors or other damp places.

Specifications per downlight

• Power: 18W · Luminous flux: 1,700 lumens · Energy label: E
• Light colour: daylight white 6000K, CRI ≥80 · Beam angle: 120°
• Voltage: 220-240V, built-in driver · Dimmable: no
• Dimensions: Ø190 × 67 mm · Cut-out: Ø160 mm · Protection rating: IP20
• Certifications: CE, RoHS · Warranty: 2 years

Better value per set

The bigger the set, the lower the price per downlight. You get 20 identical downlights in exactly the same light colour, so every room looks the same. Also available as a set of 10 or 30 pieces.