LED in-ground spot 6 pieces - recessed 48W - Warm white 3000K - 3,600 lm - 24V AC/DC (power supply not included) - IP67 - stainless steel 304 - Ø300mm - walk-over

SKU: SUL-48W-3000K-6  |  Barcode: 8701961659246
Regular price 562,95
Tax included Shipping calculated at checkout.

Light colour

3000K Warm white

What does this mean?

Light colour is expressed in Kelvin (K). The lower the value, the warmer and more yellow the light; the higher, the fresher and whiter.

3000K
Warm whiteup to 3000K
Cool white3500 - 5000K
Daylight white6000K and up

The light: cosy, warm and atmospheric

?   Vragen & antwoorden over deze ground spotlight van 48 Watt

Zit er een voeding bij?
Nee. De 24V-voeding zit niet in deze set. Je hebt een 24V-voeding van minimaal 345W nodig.
Kan ik de spots rechtstreeks op 230V aansluiten?
Nee. Tussen de 230V en de spots moet altijd een 24V-voeding zitten, anders gaan ze kapot.
Hoe groot moet het gat zijn?
Ø285 mm per spot en minimaal 124 mm diep. De spot zelf is Ø300 × 94 mm.
Kan ik er met de auto overheen rijden?
Nee. De spots zijn beloopbaar (getest op 5 kN statische belasting), maar niet geschikt voor autoverkeer.
Zijn de grondspots waterdicht?
Ja, IP67: stofdicht en bestand tegen tijdelijke onderdompeling.
Zijn de grondspots dimbaar?
Nee.
Hoeveel garantie krijg ik?
3 jaar.

Staat je vraag er niet bij?

Stel je vraag over dit product en we helpen je graag verder!

OVN regulation

When purchasing a similar item, you can return your old product free of charge. Please indicate this in the comments field of the shopping cart, including the details of the old item.

Description

Set of 6 recessed LED in-ground spots of 48W, each delivering 3,600 lumens in cosy warm white 3000K. With a rim of stainless steel (grade 304), waterproof to IP67 and walk-over. Ideal for lighting up a terrace, decking, garden path, steps, façade or tree from the ground.

Please note: these in-ground spots run on 24 volts. A 24V power supply is NOT included and must be purchased separately. Never connect the spots directly to 230V; they will be destroyed instantly. For this set of 6 you need a 24V power supply of at least 345W.

What's in the box, and what isn't?

  • ✔ 6 × LED in-ground spot 48W with built-in LED driver and moulded connection cable
  • ✘ No 24V power supply (order separately)
  • ✘ No direct burial cable, junction box or waterproof connectors

How to connect the in-ground spots

The spots run on 24V AC or 24V DC. The wiring is always: 230V → 24V power supply → in-ground spots. Connect all 6 spots in parallel to the 24V output of the power supply: brown = positive (+), blue = negative (−).

  • Power supply rating: 6 × 48W = 288W. Allow at least 20% headroom, so a power supply of 345W or more.
  • Installing outdoors? Then choose a waterproof power supply (IP67). A standard power supply must be installed somewhere dry, for example in a shed or meter cupboard.
  • Connections: make every connection in the ground waterproof, for example with a gel-filled junction box or an IP68 connector.
  • Long cable runs? At 24V, the voltage drops over long distances. For cable runs of more than 10 metres, use a thicker cable (for example 2 × 1.5 mm²).

Not sure about the wiring? Then have it done by an electrician.

Installation in 4 steps

  1. Drill or dig a Ø285 mm hole for each spot, at least 124 mm deep. The spot itself measures Ø300 × 94 mm; the Ø300 mm stainless steel rim rests over the edge of the hole.
  2. Put a layer of gravel or sand in the bottom of the hole so rainwater can drain away instead of collecting around the spot.
  3. Pull the cable through and make a waterproof connection to the 24V cable.
  4. Press the spot into the hole, switch on the power supply and check that all spots light up. Then neatly finish off the edges.

Walk-over and built for outdoors

The in-ground spots have been tested to the European standard for ground-recessed luminaires (EN 60598-2-13) for a static load of 5 kN (approx. 500 kg) and for the impact resistance of the glass. So you can simply walk over them. They are not intended for places where cars or other vehicles drive over them.

With IP67 they are completely dust-tight and resistant to rain, sprinklers and temporary submersion. Inside are an aluminium heat sink and a waterproof potted driver. The rim and top are made of stainless steel 304 and can withstand wind and weather.

What light effect do you get?

Each spot delivers 3,600 lumens in warm white 3000K: the same cosy light as a classic incandescent bulb. The 45° beam angle gives a focused beam. Place the spot about 30 cm in front of a wall and it will light up a large part of the wall upwards (see the light simulation). With this wattage you can also powerfully light up large trees, tall façades and columns. For just orientation lighting in a path, a lower wattage is often enough.

Specifications per in-ground spot

  • Power: 48W · Luminous flux: 3,600 lumens
  • Light colour: warm white 3000K, CRI ≥80 · Beam angle: 45°
  • Voltage: 24V AC/DC (power supply not included) · Dimmable: no
  • Dimensions: Ø300 × 94 mm, light surface Ø240 mm · Drill hole: Ø285 mm
  • Protection: IP67, class III · Load rating: 5 kN static (walk-over) · Material: stainless steel 304 rim, aluminium heat sink, glass cover
  • Lifespan: 30,000 burning hours · Certifications: CE, RoHS · Warranty: 3 years

Better value as a set

With this set of 6 you pay less per in-ground spot than when buying them individually. You get 6 identical spots with exactly the same light colour, so everything in your garden looks equally good.

Specifications

  • RoHs quality mark
    ✔
  • CRI (colour rendering index)
    ≥80
Documents (3)