LED high bay UFO 100W - 7 pieces - Cool white 4000K - 12,000 lm - IP65 - 230V

A veterinary practice for farm animals often has a treatment stall or shed where a cow or horse is examined. You want plenty of light there, but without harsh shadows. With these seven 100W UFO high bays in cool white 4000K, you can illuminate the stall and treatment room at the same time.

Who is this set for?

This set is intended for entrepreneurs, installers, and managers who want to illuminate a space properly all at once. You receive all 7 lamps at the same time, with the same light colour and the same light output, so that the lighting is consistent everywhere. Ideal for a complete renovation, a conversion, or new construction.

Flat, light and compact

It is striking how thin this lamp is: just 29 mm, with a diameter of 257 mm. At approximately 0.78 kg each, it is light enough to hang from a simple hook or chain. The electronics are located directly on the LED board, so there is no separate driver compartment.

Light colour and beam

Cool white 4000K provides bright, natural light. You can see skin, wounds, and hooves clearly, and the light is gentle on the animals. Each lamp provides 12,000 lumens in a 90° beam. With this set of 7, you have a total of 84,000 lumens.

Light on the work floor

A high bay hangs high, but what matters is the light below. With 12,000 lumens per lamp and a 90° beam, from 6 to 12 metres away there is enough light on the floor for warehouse work, production, and maintenance. Combine multiple lamps in a row or grid for an even result.

Layout for 7 units

Hang five lamps above the stall in a long row and two above the treatment area, at a height of 6 to 12 metres, with 6 to 9 metres between them. This is a rule of thumb; if in doubt, a lighting calculation for your space will help.

Installation

Step one is a suspension point: a hook in the purlin or a chain from the roof. Then hang the lamp by the bracket on top. Finally, connect the short cable of approximately 20 cm to a junction box; phase, neutral, and earth. A ballast or driver is not required.

This is advice; connection to 230V should be carried out by a certified installer.

How much electricity does it cost?

Calculation example: 7 lamps of 100W consume 700W together. At 10 hours of use per day and 250 days per year, that is approximately 1,750 kWh per year, around 525 euros at 0.30 euros per kWh.

Replace your old 150W metal halide lamps (which consume around 170W with a ballast). Then you will save approximately 1,225 kWh per year with this set at the same usage.

All data at a glance

• Luminous flux: 12,000 lm at 100W
• Light colour: cool white 4000K, colour rendering CRI ≥80
• Beam angle: 90°
• Size and weight: Ø257 × 29 mm, approx. 0.78 kg
• Protection: IP65, class I
• Connection: 230V~, cable approx. 20 cm, non-dimmable
• Warranty: 3 years

What is included, what is not

• Included: 7 × 100W cool white 4000K high bay with suspension bracket
• Not included: chain, hook, and junction boxes

Also available in packs of 2 or 10. A larger set offers a lower price per unit.