LED high bay UFO 150W - 2 pieces - Cool white 4000K - 22,500 lm - Philips driver - IP65 - 230V

A small workshop for garden and park machinery often has only a few workstations. You want simple, powerful lighting there without dimmers or control cables. This set of two 150W UFO LED high bays in cool white 4000K with a Philips driver can simply be switched on and off.

Five reasons to choose this high bay

1. 150 lumens per watt
2. Dust- and water-jet proof according to IP65
3. No warm-up time: full brightness immediately
4. 50,000 hours of operation according to the manufacturer
5. 5-year warranty

Shape and size

Each lamp has a round housing measuring approximately Ø300 mm by 110 mm, weighing around 1.88 kg. The LEDs are recessed behind a cover; there is an eye on top for hanging it up.

What you see

Cool white 4000K is neutral and bright: you can clearly see mowers, chain saws, and engines without the light becoming tiring. Each lamp provides 22,500 lumens in a 120° beam. With this set of 2, you have a total of 45,000 lumens.

On or off, nothing else

This version has no dimming function: one switch is enough. No control wires, no controls, just light when you need it.

Placement guidelines

• Beam: 120°
• Height: approximately 6 to 10 metres
• Spacing: approximately 6 to 10 metres
• Hang above paths, not above high platforms

How to hang 2 lamps

Hang the two lamps above the two workbenches, at a height of 6 to 10 metres, with approximately 6 to 10 metres between them. This is a rule of thumb; if in doubt, a lighting calculation for your space will help.

Practical example

In a workshop with a few workbenches, a simple installation is most convenient. No dimmer, no control wires: two lamps, one switch by the door. If you expand later, you can order additional lamps of the same type and the lighting will remain consistent.

Installation

1. For each lamp, ensure a sturdy suspension point (hook or chain, sold separately).
2. Hang the lamp by the eye.
3. Connect the approximately 30 cm power cable to a junction box: phase, neutral, and always the earth (Class I).

Advice: have this done by a certified installer.

Power consumption

Calculate 300W for the entire set. At 2,500 hours of operation per year (10 hours on 250 days), that is approximately 750 kWh, or around 225 euros at 0.30 euros per kWh. This is a calculation example.

If you replace your old 400W metal halide lamps (with a ballast of around 440W), you will save approximately 1,450 kWh per year with this set under the same usage.

Technical specifications

• Power and light: 150W, 22,500 lm, 150 lm/W
• Light colour: cool white 4000K, CRI ≥80
• Beam: 120°
• Dimensions: Ø300 × 110 mm, approx. 1.88 kg
• IP65, IK09, Class I, 230V
• non-dimmable
• Cable approximately 30 cm
• 50,000 hours, 5-year warranty, energy class D

What you get

• 2 × UFO high bay 150W, cool white 4000K, with power cable

Required separately

• Hook or chain, junction boxes

Also available individually or as a set of 6. Larger sets are more economical per lamp.