LED high bay UFO 150W - 3 pieces - Daylight white 6000K - 22,500 lm - Philips driver - IP65 - 230V

A body shop wants to inspect bodywork and dent repair under bright, white light. These three 150W UFO high bays in daylight white 6000K hang above the workstations and have no dimming technology that can malfunction.

At a glance

High efficiency (150 lm/W), a housing that keeps dust and water out, and a connection without loose parts. This keeps the installation tidy and means there is little maintenance to worry about.

The luminaire

A compact, black UFO cover with a diameter of 300 mm and a height of 110 mm. Weighing approximately 1.88 kg each, one sturdy mounting point per lamp is sufficient.

What you see

Daylight white 6000K makes dents and unevenness in bodywork clearly visible, especially in combination with reflections on the paintwork. Each lamp produces 22,500 lumens in a 120° beam. With this set of 3, you have a total of 67,500 lumens.

On or off, nothing else

This version has no dimming function: one switch is enough. No control wires, no controls, just light when you need it.

Light where you need it

With 22,500 lumens per lamp and a 120° beam, there is more than enough light on the workshop floor from a height of 6 to 10 metres. Multiple lamps at equal distances provide the most even result.

How to hang 3 lamps

Hang the three lamps in a row above the workstations, at a height of 6 to 10 metres, with 6 to 10 metres between them. This is a rule of thumb; if in doubt, a lighting calculation for your space will help.

Practical example

Bodyworkers often inspect a repair by looking along the surface. With lamps directly above the workstation and bright white light, even the smallest unevenness stands out. The non-dimmable Philips model keeps the installation simple and reliable.

Installation

1. Provide a sturdy mounting point (hook or chain, sold separately) for each lamp.
2. Hang the lamp by the eye.
3. Connect the approximately 30 cm power cable in a junction box: phase, neutral, and always earth (Class I).

Advice: have this done by a certified installer.

Energy calculation example

Suppose the lamps burn for 10 hours per working day, 250 days per year. Then this set of 3 consumes approximately 1,125 kWh, around 338 euros at a rate of 0.30 euros per kWh.

If you replace your old 400W metal halide lamps (with a ballast, around 440W), you will save approximately 2,175 kWh per year with this set under the same usage.

Specifications at a glance

• 22,500 lumens at 150W
• Daylight white 6000K · CRI ≥80 · 120°
• Ø300 mm × 110 mm · approx. 1.88 kg
• IP65, IK09 · Class I
• 230V · non-dimmable · approx. 30 cm cable
• 5-year warranty, energy class D

Contents and extras

• Included: 3 × 150W daylight white 6000K high bay
• Not included: chain, hook, junction boxes

Other quantities: per piece or as a set of 6.