LED high bay UFO 200W - 2 pieces - Cool white 4000K - 30,000 lm - DALI 2.0 dimmable - IP65 - 230V

In a new commercial property with a building management system, you will want to be able to control each lamp separately: by zone, by time, or based on daylight. This set of two 200W UFO LED high bays in cool white 4000K with DALI 2.0 fits this perfectly.

Why this UFO high bay?

• 30,000 lumens at 200W: 150 lumens per watt
• IP65: dust-tight and resistant to water jets
• Aluminium housing with cooling fins for a long service life
• Instant full light, without warm-up time
• Service life of 50,000 hours and 5-year warranty

Appearance and construction

• Round model, Ø350 mm, 124 mm high
• Weight approximately 3.8 kg
• Black aluminium housing with cooling fins
• Hanging eye on top

Bright light on the floor

Cool white 4000K is neutral white light: professional and bright, comfortable for working long hours. With DALI, you can precisely control the level per lamp. Each lamp provides 30,000 lumens in a 120° beam. With this set of 2, you have a total of 60,000 lumens.

Smart control with DALI

DALI 2.0 is a digital protocol that allows you to precisely dim and group your lighting. Connect the lamps to your existing DALI installation or building management system and control them individually or by zone.

Height and light level

The lamp is intended for a mounting height of approximately 8 to 12 meters. If you hang it lower, the light becomes brighter and the light spot smaller; if you hang it higher, you spread the light over a larger area.

Lighting plan for 2 lamps

Hang the lamps in the two zones you want to switch separately, at a height of 8 to 12 meters, with 8 to 12 meters between them, and assign each luminaire its own DALI address. This is a rule of thumb; if in doubt, a lighting calculation for your space will help.

Practical tip

With DALI, you connect the lamps to a schedule or a daylight sensor in the building management system. This way, the lighting turns on automatically in the morning, dims when there is plenty of daylight, and reports a fault immediately. When expanding, you add new luminaires to the same DALI line.

How to hang them up

• One sturdy mounting point per lamp with a hook or chain
• Connection cable approximately 30 cm, to a junction box at 230V
• Connect phase, neutral, and earth
• Work at height with a cherry picker

Advice: have the connection done by a certified installer.

Economical with 150 lumens per watt

Each watt delivers 150 lumens here. The entire set of 2 consumes 400W. Example: 2,500 hours of operation per year results in approximately 1,000 kWh, around 300 euros at 0.30 euros per kWh.

If you replace your old 400W metal halide lamps (with a ballast, around 440W), you save approximately 1,200 kWh per year with this set at the same usage.

Short and sweet

200W · 30,000 lm · 150 lm/W · 120° · cool white 4000K · CRI ≥80 · Ø350 × 124 mm · approx. 3.8 kg · IP65 · class I · 230V · DALI 2.0 dimmable · cable approx. 30 cm · 50,000 hours · 5-year warranty.

Contents of the set

2 complete 200W high bays in cool white 4000K. Chains, hooks, junction boxes, dimmer, or control are arranged by you.

Need more or less? Choose per piece or as a set of 3; per piece you pay less as the set gets larger.