LED UFO high bay 200W - 2 pcs - Neutral white 5000K - 30,000 lm - Philips driver - 1-10V dimmable - IP65 - 230V

An auto body shop prefers to assess paintwork damage and colour differences under light that closely resembles daylight. This set of two 200W UFO LED high bays in neutral white 5000K provides bright, crisp light above the workshop.

Who is this set for?

For business owners, installers and facility managers who need multiple luminaires at the same time. You receive 2 identical lamps with the same colour and light output, so the lighting throughout the entire space is uniform. Ideal for renovations or new builds.

What you get out of the box

A black, round high bay measuring Ø324 mm and 136 mm high, weighing approximately 3.4 kg. The suspension eye is on top; underneath, you can see the LEDs under the cover. The approximately 30 cm power cable is already attached.

The light

Neutral white 5000K is white light with a slight daylight tone. Scratches, dents and colour nuances in the paintwork are more noticeable than under warmer light. Each lamp provides 30,000 lumens in a 120° beam. With this set of 2, you have a total of 60,000 lumens.

Dimmable with Philips driver

The built-in Philips driver is 1-10V dimmable. With 1-10V control, you can adjust the light intensity continuously. Without a dimmer, the lamp simply operates at full power. A dimmer is not included.

Height and light level

The lamp is intended for an installation height of approximately 8 to 10 metres. If you hang it lower, the light becomes brighter and the light spot smaller; if you hang it higher, you spread the light over a larger area.

How to distribute 2 lamps

Hang one lamp above each workstation or lift, at a height of 8 to 10 metres, with 8 to 10 metres between the lamps. This is a rule of thumb; if in doubt, a lighting calculation for your space will help.

How to use the set

Body shops often work with a paint booth and a separate dent removal area. Hang the lamps above these two areas. The neutral white light helps assess dent removal work and compare colour samples before the car goes into the spray booth.

Installation in brief

Hang the lamp by the suspension eye from a chain or hook and connect the approximately 30 cm power cable to the power supply using a junction box. Do not forget the earth wire: the lamp is protection class I.

Always have electrical work carried out by a certified installer; this is advice.

Energy

• Set power: 400W
• Example: 10 hours per day, 250 days per year
• Consumption: approximately 1,000 kWh per year
• Costs at 0.30 euros per kWh: approximately 300 euros

If you replace your old 400W metal halide lamps (with a ballast drawing approximately 440W), you will save approximately 1,200 kWh per year with this set under the same usage.

Technical specifications

Per lamp: 200W and 30,000 lumens (150 lm/W) in a 120° beam. Light colour neutral white 5000K with CRI ≥80. Dimensions Ø324 × 136 mm, weight approximately 3.4 kg. IP65, class I, 230V, 1-10V dimmable. Power cable approximately 30 cm. Lifespan 50,000 hours, 5-year warranty.

Set contents

2 complete 200W high bays in neutral white 5000K. Chains, hooks, junction boxes, dimmers or controls are provided by you.

Need more or less? Choose per piece or as a set of 4; the larger the set, the less you pay per piece.