LED high bay UFO 200W - 3 pieces - Cool white 4000K - 30,000 lm - Philips driver - 0-10V dimmable - IP65 - 230V

A distribution centre has long loading docks where trucks load and unload day and night. At the docks, the lighting must be powerful and reliable. With these three 200W UFO high bays in cool white 4000K, you can illuminate a row of loading doors at once.

Why switch to LED?

Old metal halide lamps (HPI/HQI) take minutes to warm up and lose a lot of light over time. This LED high bay is at full power immediately, lasts 50,000 hours according to the manufacturer's specifications, and requires no replacement of lamps or ballasts. That saves cherry picker hours at a height of 8 to 10 metres.

Dimensions and weight

Allow for a diameter of 324 mm, a height of 136 mm and a weight of approximately 3.4 kg per lamp. A sturdy hook or chain per lamp is sufficient to hang it up.

Bright light on the floor

Cool white 4000K is the standard in logistics: bright and neutral, so that barcodes, pallet labels and forklift positions are clearly visible, even in the middle of the night. Each lamp produces 30,000 lumens in a 120° beam. With this set of 3, you have a total of 90,000 lumens.

Controlling the light

Do you want less light in the evening or during quiet hours? The Philips driver is 0-10V dimmable, so you can adjust the lamp continuously with a suitable 0-10V control system (not included). Without control, it simply operates at full power.

120° beam

With a beam angle of 120°, the light falls broadly and evenly over a large floor area. The higher you hang it, the larger the light spot, but also the lower the light level per square metre.

Lighting plan for 3 lamps

Hang the lamps in a row parallel to the loading doors, at a height of 8 to 10 metres and about 8 to 10 metres apart, just inside the door openings. This is a rule of thumb; if in doubt, a lighting calculation for your space will help.

Practical tip

At loading docks, the light changes constantly: doors open and close, and outside it is day or night. With three identical lamps and a 0-10V control system, you adjust the light level to the time of day. This way, drivers and forklift operators always see where the pallet needs to be.

How to hang them up

• One sturdy mounting point with a hook or chain per lamp
• Connection cable approximately 30 cm, to a junction box at 230V
• Connect phase, neutral and earth
• Work at height with a cherry picker

Advice: have the connection carried out by a certified installer.

What you pay in electricity

Allow for 600W for the complete set. At 10 hours per day, 250 days per year, the lamps together consume approximately 1,500 kWh, about 450 euros per year at 0.30 euros per kWh.

If you replace your old 400W metal halide lamps (with a ballast of about 440W), you save approximately 1,800 kWh per year with this set under the same usage.

All data at a glance

• Luminous flux: 30,000 lm at 200W (150 lm/W)
• Light colour: cool white 4000K, CRI ≥80
• Beam angle: 120°
• Size and weight: Ø324 × 136 mm, approx. 3.4 kg
• Protection: IP65, class I
• Connection: 230V~, cable approx. 30 cm, 0-10V dimmable
• Warranty: 5 years

You receive

• 3 × UFO high bay 200W, cool white 4000K

Purchase yourself

• Hanging chain or hook
• Junction boxes for the connection, dimmer or control system

Other quantities: per piece or as a set of 4.