LED high bay UFO 200W - 6 pieces - Daylight white 6000K - 24,000 lm - IP65 - 230V

A boatyard or shipyard is high, damp and often dark between the hulls. Anyone inspecting the underside of a ship or applying antifouling wants light that reaches all the way under the keel. This set of six 200W UFO LED high bays in daylight white 6000K brings that light down from the roof.

Why this UFO high bay?

• High light output: 120 lumens per watt
• IP65: dust-tight and resistant to water jets, so also suitable for dusty or damp halls
• No separate driver, so fewer components that can fail
• Flat and lightweight, making it easy to hang
• Instant full light when switched on, with no warm-up time

What the lamp looks like

The UFO high bay is a flat, round lamp approximately 357.5 mm in diameter and 30 mm thick, weighing around 1.6 kg. There is an integrated mounting bracket on top; the LEDs are located behind a lens on the underside. There is no separate driver or ballast.

How the light looks

Daylight white 6000K resembles natural outdoor light. Scratches, osmosis blisters and paint burn are immediately visible, and the colours of gelcoat and paint can be assessed just as they would look outdoors. Each lamp produces 24,000 lumens in a 90° beam. With this set of 6, you have a total of 144,000 lumens.

90° beam

With a beam angle of 90°, the light is wide enough to cover a large floor area, but concentrated enough to provide sufficient light on the work floor from a height of 10 to 20 metres. The higher you hang it, the larger the light patch, but also the lower the light level per square metre.

Layout with 6 high bays

Hang the six lamps in two rows of three above the boat lifts or the slipway area. Mounting height: 10 to 20 metres, with a rough guide spacing of 10 to 14 metres between them. This is a rough guide; if in doubt, a lighting calculation for your space will help.

Installation

Step one is a mounting point: a hook in the purlin or a chain from the roof. Then hang the lamp from the bracket on top. Finally, connect the short cable of approximately 20 cm to a junction box; live, neutral and earth. A ballast or driver is not required.

This is advice; connection to 230V should be carried out by a certified installer.

Actual power consumption

Together, the 6 lamps draw 1,200W. If they are used for 10 hours a day on 250 working days, that amounts to around 3,000 kWh per year. At 0.30 euros per kWh, this costs approximately 900 euros. This is an example calculation; your hours and tariff determine the actual amount.

If you replace your old 400W metal halide lamps (which consume around 440W with a ballast), you will save approximately 3,600 kWh per year with this set under the same usage.

In short

200W · 24,000 lm · 120 lm/W · 90° · daylight white 6000K · CRI ≥80 · Ø357.5 × 30 mm · approx. 1.6 kg · IP65 · class I · 230V · non-dimmable · cable approx. 20 cm · 3-year warranty.

You receive

• 6 × UFO high bay 200W, daylight white 6000K
• Built-in mounting bracket per lamp

Purchase yourself

• Hanging chain or hook
• Junction boxes for the connection

Other quantities: per piece, set of 2 or set of 10.