LED panel 62x62 cm Edge-lit - 2 pieces - 36W - Daylight white 6000K - 4680 lm - CRI80 - 230V

A small workshop for 3D printing and laser cutting needs fresh light for measuring parts. These two 62x62 cm LED panels in daylight white 6000K hang above the measuring table.

Hassle-free lighting

No tubes to replace, no starters and no humming ballasts. You place the panel in the ceiling, connect the driver and enjoy even light of 4,680 lumens per panel for years.

How the light looks

6000K is bright white light, ideal for precision work. Small letters and details are clearly visible. Each panel produces 4,680 lumens at 36W; together that is 9,360 lumens.

The 62x62 size

The 62x62 panel is designed for ceilings with a 625 × 625 mm grid. You will find this size in older offices and schools. A standard 60x60 panel is too small for these; this panel fits the profiles exactly.

It is an edge-lit panel: the LEDs are located around the edge and the light is distributed across the entire surface.

Mounting options

Inserting it into a suspended ceiling is the fastest way. The panel fits into a suspended ceiling with a 625 × 625 mm grid. For concrete or plasterboard, there is a suitable 620x620 mm surface-mounted frame (available separately), which allows the panel to be mounted against the ceiling.

Comfortable for the eyes

A large, even light surface produces less glare than individual spotlights or fluorescent tubes. With a 120° beam, the light is well distributed throughout the room.

How to arrange the panels

Hang the panels above the measuring table and the printers.

How to use the set

When measuring printed parts, you can see every imperfection under bright white light. You can also better assess the color of the filament.

Where can you see these panels?

Everywhere there is a suspended ceiling: from offices to canteens, from consultation rooms to showrooms. Two panels are enough for a small room or to replace a few old fixtures.

Installation

• External driver included
• Connection cable approximately 20 cm
• 230V, connect to a junction box
• Driver next to the panel on the ceiling

Advice: have this done by a certified installer.

Calculation example

If the two panels burn for 10 hours per workday, 250 days per year, that costs approximately 54 euros in electricity (180 kWh at 0.30 euros per kWh).

Low maintenance

• No lamps to replace
• Clean with a dry cloth
• 5-year warranty

Note for wet areas

These panels are intended for dry indoor spaces. Do not hang them directly above a shower or in a room where they may get wet.

Short

62x62 cm · 36W · 4,680 lm · Daylight white 6000K · CRI 80 · 120° · External driver · 230V · cable approx. 20 cm · 5-year warranty.

Included

• 2 × 62x62 cm panel
• 2 × driver

Not included: junction boxes and surface-mounted frame. Also available as a set of 6.