LED Panel 62x62 RGBWWW 40W - 4560 Lumen - RGB + warm white to daylight white - Back-lit - per piece

White light to work by and colour for atmosphere, in one ceiling panel. This back-lit RGBWWW LED panel 62x62 is 40W with 4.560 lumen. Besides red, green and blue LEDs there are separate white LEDs inside, so you can not only choose any colour but also get pure white light, steplessly adjustable from warm white 2700K to daylight white 6500K. You control colour, light colour and brightness wirelessly with an RGB+CCT remote control.

In brief

• 4.560 lumen at 40W
• RGB + white: millions of colours and white from 2700K to 6500K
• Dimmable and wirelessly controlled (2,4 GHz)
• Back-lit^ⓘ for an evenly lit surface
• Size 620×620×35 mm, including driver and receiver
• 5-year warranty

Why RGBWWW and not just RGB?

With an ordinary RGB panel, white is mixed from red, green and blue. That white often looks bluish or pink and gives little light. This panel therefore has its own white LEDs for warm and cool white (the "WW" in RGBWWW). This gives you truly usable work light, and whenever you want you switch to colour. Combinations are possible too, for example a warm white with a touch of amber for a cosy evening.

One panel, many applications

• Office and meeting room: bright cool white during the day, warmer light towards the end of the day
• Hospitality and retail: change the atmosphere per moment or season, or bring back your brand colour
• Waiting room, practice and salon: soothing warm light or a soft colour
• Game room, studio or canteen: vivid colours for a striking effect

Control by remote control

With the RGB+CCT remote control you pick the colour on the colour wheel, set the light colour of the white and dim steplessly. The remote control has 4 zones: you can group panels and control each group separately, or all at once. For example, set the panels above the bar to colour and the rest to white. The remote control is not included with the panel and is available separately; for several panels in one room you only need one.

Back-lit: even light across the whole surface

In back-lit panels the LEDs sit behind a diffuser instead of in the edge. As a result the light is evenly spread over the whole surface, without brighter edges or spots, and the colours mix neatly too. The beam angle of 120° provides a wide light distribution. With a CRI^ⓘ of 80 or higher, colours are reproduced naturally in white mode.

Mounting and connection

The panel measures 620×620×35 mm and fits standard suspended ceilings with 62x62 tiles (625×625 mm grid): you simply lay it into the ceiling. Each panel comes with an external driver and receiver. You connect the driver to 230V and it converts this to the low voltage (24V) for the panel. The white frame suits most ceilings. IP41^ⓘ, intended for indoor use.

5-year warranty

You get a 5-year warranty on this panel. This is the single version per piece; for a whole room, the box of 8 pieces is better value.