LED tube 90 cm T8 - 10 pieces - 12W - 1,440 lm - Daylight white 6000K - G13 - glass - flicker-free

This set contains 10 T8 LED tubes measuring 90 cm. Each tube produces 1,440 lumens while using just 12 watts (120 lm/W^ⓘ) in daylight white 6000K. It replaces a standard 30-watt T8 fluorescent tube and fits into the same G13^ⓘ fitting. This means you use far less electricity for at least as much light. You get 10 tubes in the same light colour.

Glass with protective PET film

The tube is made of glass, just like a traditional fluorescent tube. Glass provides an even, clear line of light and does not yellow. The glass is covered with a PET film: if the tube does fall, the shards will remain inside the film and will not splinter throughout the room. This makes it safer when installing from a ladder and in spaces where people work or eat.

Daylight white 6000K: fresh and extra bright

Daylight white light at 6000K is fresh and bright and resembles daylight on a cloudy day. It creates a strong sense of brightness and is therefore popular in workshops, garages, warehouses, storage rooms, parking garages, and technical rooms—anywhere you want good contrast and sharp visibility. With a CRI^ⓘ of at least 80, colours look natural.

How to replace your old fluorescent tube

The tube is 900 mm long, exactly the size of a standard 90 cm T8 fluorescent tube. Each tube comes with an LED starter.

• Conventional ballast (with starter): remove the old starter, install the included LED starter, and place the LED tube in the fitting.
• Electronic ballast (no starter): this device must be removed from the luminaire, and the tube is connected directly to 230V~.
• If you are unsure which type of luminaire you have or do not want to convert it yourself, have an installer do it.

Flicker-free and energy-efficient

The tube is flicker-free: no distracting light when working with computer screens, in the workshop, or on camera. Sanan's LED chips ensure a long lifespan and an even light output along the entire length, with a beam angle of 120°. The tube is not dimmable and has a protection rating of IP20^ⓘ, for dry indoor spaces.

Where to use this tube?

• Workshops and garages
• Warehouses, storage areas, and sheds
• Parking garages and technical rooms
• Storage rooms, basements, and attics

Why a set of 10?

With 10 tubes, you can convert, for example, 5 double or 10 single luminaires without having to buy a whole box right away. All tubes have the same light colour.

In short

• 12W, 1,440 lumens, 120 lm/W, replaces a 30W fluorescent tube
• Daylight white 6000K, CRI ≥80, beam angle 120°
• T8, G13, 900 mm, 230V~, flicker-free, not dimmable
• Glass with PET film, IP20, LED starter included
• Set of 10, 3-year warranty