LED high bay UFO 100W - 2 pieces - Daylight white 6000K - 15,000 lm - dimmable - 230V

A set of two identical UFO high bays for anyone looking to brightly and evenly illuminate a hall, workshop, or warehouse. You receive 2 × UFO LED high bay 100W in daylight white 6000K, each with 15,000 lumens (150 lm/W) and a dimmable Philips Xitanium driver.

2 high bays in one set

Together they deliver 30,000 lumens with a total consumption of 200W. Each lamp replaces approximately 230W of traditional lighting. All lamps in the set are identical, so you get the same light colour and brightness everywhere. This high bay is also available individually, in sets of 2 to 5, and as a box of 6: the larger the package, the lower the price per unit.

Light colour: daylight white 6000K

Daylight white 6000K provides crisp, bright light that closely resembles daylight. Ideal for warehouses, workshops, sports halls, and supermarkets, where good visibility is important. The colour rendering is CRI ≥80 and the beam angle is 120°.

Dimmable with 0-10V

The Philips driver is continuously dimmable via a separate 0-10V control cable. For this, you need a suitable 0-10V dimmer or lighting control system. If you do not use a dimmer, the lamp simply operates at full power via a wall switch.

Robust for demanding spaces

The aluminium housing is dust-tight and resistant to water jets (IP65) and impact-resistant (IK09). This makes the lamp suitable for dusty workshops, damp sheds, and covered areas. The lifespan is 50,000 hours and you receive 5 years warranty.

Specifications per lamp

• Power and light: 100W, 15,000 lm (150 lm/W)
• Light colour: daylight white 6000K, CRI ≥80, beam angle 120°
• Dimensions: Ø255 × 110 mm, weight 1.53 kg
• IP65, IK09, protection class I
• 230V~, energy label D

What is not included

• A 0-10V dimmer or lighting control system (required for dimming)
• Plug, suspension hook, chain or cable, and installation material

Installation tips

• Securely tighten the eye bolt with the spring washer on top of the driver housing.
• Drill a hole of Ø 8 mm and 60 mm deep in a load-bearing ceiling and install a plug with a suspension hook.
• Hang up the lamp and connect: brown = phase (L), blue = neutral (N), yellow-green = earth.
• At a height of 4 to 6 metres, 1 lamp per 15 to 20 m² is a good starting point.

These tips are intended as advice; no rights can be derived from them. Have the 230V connection carried out by a certified installer.