COB LED Strip - Extra Warm White 2200K - 24V - 8W/m - 800lm/m - CRI>90 - IP20 - 5m

This COB LED strip extra warm white 2200K gives one completely even line of light, without the separate dots you know from a regular LED strip. That is thanks to COB^ⓘ technology with no fewer than 320 LEDs per metre. You get a 5 metre roll with 800 lumens per metre at 8W/m: 4,000 lumens at 40W in total. With a CRI^ⓘ above 90, wood, fabrics and skin tones look natural and warm.

Extra warm white 2200K: the light of candles and an open fire

2200K is even warmer than the light of a regular incandescent bulb and comes close to the golden light of a candle or an open fire. It is the most atmospheric white there is, ideal for places where you really want to relax: the living room, the bedroom, a reading corner or a wellness area. In hospitality and in classic interiors with wood, brick and warm colours this light also comes into its own beautifully. As indirect lighting along the ceiling, behind the TV, in a niche or bookcase or along the stairs it gives a soft, golden glow. Because COB shows no visible dots, you see a clean line instead of a row of dots, even when it reflects in a glossy worktop or glass shelf.

Why COB instead of a regular LED strip?

On a regular SMD LED strip the LEDs are spaced apart, so without a cover you see separate light points and shadows. On this COB strip the chips sit so close together, under a phosphor layer, that the light leaves the strip as one continuous line. A diffuser cover or aluminium profile is therefore not needed for a nice result. If you still want to hide the strip neatly or cool it better, its 8 mm width and 2.3 mm thickness fit narrow aluminium profiles. The beam angle is a wide 170°, so the light spreads broadly and softly.

Connecting: which power supply do you need?

The strip runs on 24V DC and is supplied without power supply, dimmer or controller. At the start of the roll there are two connection wires of about 15 cm (red is plus, black is minus), which you connect directly to a 24V LED power supply. Count on 8W per metre of strip and choose a power supply with at least 20% more power than your strip, so it does not have to run at its limit and lasts a long time. A full 5 metre roll uses 40W, so it goes with a 24V power supply of 48W. Our own 24V LED power supply of 48W with plug therefore matches exactly one roll. The maximum run length is 5 metres. If you use multiple rolls, connect each one separately (in parallel) to a power supply that is large enough, not in series, otherwise the end of the strip becomes visibly darker.

Dimmable

The strip is dimmable with a suitable 24V LED dimmer placed between the power supply and the strip. Dimming is especially beautiful with extra warm white: dimmed you get a deep, candle-like light. The dimmer is not included; make sure it is suitable for 24V constant voltage and can handle at least the power of your strip.

Cutting and mounting

You can cut the strip to size at the marked cut lines, every 50 mm (5 cm). Only cut on those lines, otherwise the last section will no longer work. The back has strong 3M tape. Clean the surface beforehand so it is dry and grease-free, and press the strip firmly for the best adhesion. The strip is flexible and can follow curves, but do not kink it and do not bend it at the cut lines.

Indoor use only

With protection rating IP20^ⓘ the strip is not protected against moisture. Use it only in dry indoor spaces such as the living room, bedroom, kitchen (not directly above the sink), hallway, office or shop fittings. It is not suitable for bathrooms or outdoors.

What is in the box?

You receive 1 roll of 5 metre COB LED strip with connection wires and 3M tape on the back. A 24V power supply, dimmer, connectors and aluminium profile are not included.

In short

24V DC, 8W per metre (40W per roll) and 800 lumens per metre (4,000 lumens per roll), in extra warm white 2200K with a CRI above 90. The strip has 320 COB LEDs per metre and a beam angle of 170°. The roll is 5 metres long, 8 mm wide and 2.3 mm thick, cuttable every 50 mm, IP20 for indoor use, dimmable with a suitable 24V LED dimmer, and comes with a 2 year warranty.